BIOS Surface Pro 5 1796

Star Rating

5.00 star(s)

Surface Pro 5 1796

 

[saidlaaouaj]

PLEASE UNPASS

 

[ThienBui]

PLEASE UNPASS

not see file

 

[saidlaaouaj]

PLEASE UNPASS

 

[ThienBui]

PLEASE UNPASS

 

[alix]

clear me please

 

[ThienBui]

clear me please

 

[alix]

thanks a lot

 

[ct lab]

Sir urface pro 1796 power on then after 5 second off ..

 

[ThienBui]

Sir urface pro 1796 power on then after 5 second off ..

 

[dudipupas]

Surface Pro 5 1796 shows logo and powers off after few seconds...

 

[ThienBui]

Surface Pro 5 1796 shows logo and powers off after few seconds...

you need try one BIOS other and compare result

 

[dudipupas]

you need try one BIOS other and compare result

Already tried another BIOS. With other bios It boots but I got error Code 10 on surface Touch Firmware in device Manager - so touch is not working.

 

[ThienBui]

Already tried another BIOS. With other bios It boots but I got error Code 10 on surface Touch Firmware in device Manager - so touch is not working.

send I file BIOS Touch not work

 

[dudipupas]

send I file BIOS Touch not work

 

[ThienBui]

fix

 

[dudipupas]

fix

Thank you! This worked for a while but after few minutes touchscreen stops working again. After a reboot it works again for about 2 minutes. Any ideas what could cause this?

 

[ThienBui]

Thank you! This worked for a while but after few minutes touchscreen stops working again. After a reboot it works again for about 2 minutes. Any ideas what could cause this?

need to check and test i am also not sure where the problem comes from

 

[dudipupas]

need to check and test i am also not sure where the problem comes from

Can you do a fix for this BIOS file too? Here I get error code 14 on the Surface Touch Driver. Will try if this works for me.
Thank you.

 

[ThienBui]

Can you do a fix for this BIOS file too? Here I get error code 14 on the Surface Touch Driver. Will try if this works for me.
Thank you.

please ignore the touch i will help fix it after you check the other components work perfectly first

 

[dudipupas]

please ignore the touch i will help fix it after you check the other components work perfectly first

I checked anything - no other problems than the touchscreen. Did already clean windows install but without success. Next I will try to use the surface recovery drive for a restore.