BIOS thinkpad L14 HL4A0/HL5A0 NM-D271

Star Rating

5.00 star(s)

HL4A0/HL5A0 NM-D271
thinkpad L14
Schematics
NS-D273.pdf
NM-D271.pdf
NS-D271.pdf
NS-D272.pdf
Thinkpad L14 - NM-D271 REV1.0
LENOVO_THINKPAD_L14_GEN2_LCFC_NM-D271 photo
HL4A0_HL5A0_NM-D271.tvw

 

[ThienBui]

HANG ON LOGO SIR

builds8222.zip

 

[op bind]

ONLY BEEP NO DISPLAY

 

[ThienBui]

ONLY BEEP NO DISPLAY

 

[op bind]

YE ERROR AA RAHA HAI SIR FIX HOGA YE

 

[ThienBui]

YE ERROR AA RAHA HAI SIR FIX HOGA YE

this is problem SSD

 

[op bind]

this is problem SSD

CHANGE KARNE KE NAD BHI SAME HAI SIR

 

[ThienBui]

CHANGE KARNE KE NAD BHI SAME HAI SIR

so need buy patch 35$

Pay BUI DUY THIEN using PayPal.Me

Go to paypal.me/vinafixvip and type in the amount. Since it’s PayPal, it's easy and secure. Don’t have a PayPal account? No worries.

www.paypal.com

 

[Professorr]

no power

 

[ThienBui]

no power

https://vinafix.com/attachments/builds72-zip.434188/

 

[Tuanicare216]

NM-D271 không lên hình build giúp e ạ

 

[ThienBui]

NM-D271 không lên hình build giúp e ạ

file này thiếu data

 

[master1212]

I have a problem with a Lenovo L15 Gen 2 NM-D271 motherboard with an Intel CPU
The embedded controller on the device was defective. After replacing it, the device starts up but displays an error message:
“2203 System configuration is invalid”
and
“2101 Detection error on Storage Device0 (M2.0) Main Slot)”.
There is no information about the ME firmware version in the BIOS.
Can you please help me?
Here is the original BIOS file.
THX

 

[ThienBui]

I have a problem with a Lenovo L15 Gen 2 NM-D271 motherboard with an Intel CPU
The embedded controller on the device was defective. After replacing it, the device starts up but displays an error message:
“2203 System configuration is invalid”
and
“2101 Detection error on Storage Device0 (M2.0) Main Slot)”.
There is no information about the ME firmware version in the BIOS.
Can you please help me?
Here is the original BIOS file.
THX

https://vinafix.com/attachments/builds72-zip.434188/

 

[master1212]

Thank you, but after flashing your file, the same behavior persists.

 

[ThienBui]

Thank you, but after flashing your file, the same behavior persists.

so need check chipset