What's new

FX63V DABKLMB28A0 REV A ( FZ63VD ) FX503VM

Star Rating
5.00 star(s)
FX63V DABKLMB28A0 REV A
BIOS FX503VM.308
boardview SUS FX63V DABKLMB28A0
Asus GL503V BKL(DABKLMB28A0 REV.A) photo
FX503VM REV2.2.pdf
FX503VM BoardView.pdf

FX503VM.jpg
 

Download list

ECROM.bin
128 KB · Views: 787
FX503VM.308.bin
8 MB · Views: 1,630
SUS FX63V DABKLMB28A0.fz
132.8 KB · Views: 2,349
FX503VM REV2.2.pdf
3.1 MB · Views: 1,930
FX503VM BoardView.pdf
1.1 MB · Views: 1,290
Click to expand...
Hello,


I’m currently repairing an Asus GL503VD laptop with motherboard DABKLMB28A0 Rev A. The original issue was a shorted MOSFET on the VRAM power rail, which caused 19V to reach both the VRAM and GPU, damaging them.


I have already replaced:


  • The damaged MOSFETs
  • The GPU with an identical model (N17P-G0-A1)
  • The VRAM chips (same specifications)

Now the board powers on, all voltage rails are present (including GPU CORE), and power draw reaches about 1.5A on bench power supply, but there's no display output, either on internal screen or HDMI.


I have flashed a few different BIOS files but the result is the same. I’m attaching the original BIOS dump from this board for your analysis.


Could you please check:


  • If the BIOS is corrupted or partially damaged
  • If the ME Region is valid
  • If it’s safe to reuse this dump, or if I should flash a clean one

Thank you very much in advance for your help!


Best regards,
 

Download list

DABKLMB28A0.BIN
8 MB · Views: 1
112PC said:
Hello,


I’m currently repairing an Asus GL503VD laptop with motherboard DABKLMB28A0 Rev A. The original issue was a shorted MOSFET on the VRAM power rail, which caused 19V to reach both the VRAM and GPU, damaging them.


I have already replaced:


  • The damaged MOSFETs
  • The GPU with an identical model (N17P-G0-A1)
  • The VRAM chips (same specifications)

Now the board powers on, all voltage rails are present (including GPU CORE), and power draw reaches about 1.5A on bench power supply, but there's no display output, either on internal screen or HDMI.


I have flashed a few different BIOS files but the result is the same. I’m attaching the original BIOS dump from this board for your analysis.


Could you please check:


  • If the BIOS is corrupted or partially damaged
  • If the ME Region is valid
  • If it’s safe to reuse this dump, or if I should flash a clean one

Thank you very much in advance for your help!


Best regards,
Click to expand...
builds722.zip
 
You must log in or register to reply here.

Latest posts

Back
Top