FX63V DABKLMB28A0 REV A ( FZ63VD ) FX503VM

Star Rating

5.00 star(s)

FX63V DABKLMB28A0 REV A
BIOS FX503VM.308
boardview SUS FX63V DABKLMB28A0
Asus GL503V BKL(DABKLMB28A0 REV.A) photo
FX503VM REV2.2.pdf
FX503VM BoardView.pdf

 

[Fahadfadi]

HI.SIR THIS BIOS IS WORKING ONLY STARTUP LOGO COMING AND THEN BLACK SCREEN PLZ FIX ASUS DABKLMB28A0.REV;A

 

[ThienBui]

HI.SIR THIS BIOS IS WORKING ONLY STARTUP LOGO COMING AND THEN BLACK SCREEN PLZ FIX ASUS DABKLMB28A0.REV;A

 

[Hit's Patni]

dabkxmb28a0 bios @ThienBui

 

[ThienBui]

dabkxmb28a0 bios @ThienBui

builds722.zip

 

[FC Computer]

Please Disable gpu gtx to uma

 

[ThienBui]

Please Disable gpu gtx to uma

can not disable from bios

 

[techpartners]

PLEASE CLEAR OR REBUILD MY ORIGINAL BIOS FILE -ASUS FZ63V-
HANG LOGO AND WINDOWS THANKS A LOT

 

[techpartners]

FOLLOW-UP SIRTHANK YOU

 

[ThienBui]

FOLLOW-UP SIRTHANK YOU

builds722.zip

 

[techpartners]

builds722.zip

THIS BIN FILE IS GOOD 100% I TESTED IT ALREADY THANK YOU

 

[112PC]

Hello,


I’m currently repairing an Asus GL503VD laptop with motherboard DABKLMB28A0 Rev A. The original issue was a shorted MOSFET on the VRAM power rail, which caused 19V to reach both the VRAM and GPU, damaging them.


I have already replaced:

• The damaged MOSFETs
• The GPU with an identical model (N17P-G0-A1)
• The VRAM chips (same specifications)

Now the board powers on, all voltage rails are present (including GPU CORE), and power draw reaches about 1.5A on bench power supply, but there's no display output, either on internal screen or HDMI.


I have flashed a few different BIOS files but the result is the same. I’m attaching the original BIOS dump from this board for your analysis.


Could you please check:

• If the BIOS is corrupted or partially damaged
• If the ME Region is valid
• If it’s safe to reuse this dump, or if I should flash a clean one

Thank you very much in advance for your help!


Best regards,

 

[ThienBui]

Hello,


I’m currently repairing an Asus GL503VD laptop with motherboard DABKLMB28A0 Rev A. The original issue was a shorted MOSFET on the VRAM power rail, which caused 19V to reach both the VRAM and GPU, damaging them.


I have already replaced:

• The damaged MOSFETs
• The GPU with an identical model (N17P-G0-A1)
• The VRAM chips (same specifications)

Now the board powers on, all voltage rails are present (including GPU CORE), and power draw reaches about 1.5A on bench power supply, but there's no display output, either on internal screen or HDMI.


I have flashed a few different BIOS files but the result is the same. I’m attaching the original BIOS dump from this board for your analysis.


Could you please check:

• If the BIOS is corrupted or partially damaged
• If the ME Region is valid
• If it’s safe to reuse this dump, or if I should flash a clean one

Thank you very much in advance for your help!


Best regards,

builds722.zip

 

[AmaSua]

QUITAR LA CONTRASEÑA PORFAVOR

 

[ThienBui]

QUITAR LA CONTRASEÑA PORFAVOR

 

[comzone]

I need bios Asus FX506L-HBHN334W DABKXMB28A0 REV A

​

​

 

[ThienBui]

I need bios Asus FX506L-HBHN334W DABKXMB28A0 REV A

​

​

FX503VM.308.bin

 

[comzone]

I need Asus DABKXMB28A0 REV: A Bios

 

[ThienBui]

I need Asus DABKXMB28A0 REV: A Bios

same

 

[javadka]

HI
i need the bios F1 for this device
FX608JHR
Laptop problem , stuck in logo mode

 

[ThienBui]

HI
i need the bios F1 for this device
FX608JHR
Laptop problem , stuck in logo mode

try it