Dell Alienware 13 R3 P81G BAP00 LA-D581P REV 0.2 (X01) BIOS

Star Rating

5.00 star(s)

BAP00 LA-D581P REV: 0.2(X01) BIOS
Alienware 13 R3 System BIOS
Schematics boardview LA-D581P.cad
LA-D581P_EC KB_pins=6 RIGHT DOWN 05MM KSO3=1 KSI4=4 KSI7=3 KSI6=2 KSI5=5 KB9022Q

 

[ThienBui]

Thanks, but I meant what actual physical component is the BIOS chip? The motherboard label for it?
Long story short, someone hotswapped the ram on my machine and it only lights for a second and shuts off. There is no short, there is no powerline missing, and there is no other fried component that I can find, so I am guessing I need to replace the bios chip. I don't have the money to buy a new machine or motherboard so any help would be greatly appreciated! I'm using this as a learning opportunity for myself to learn about motherboard design so please excuse any stupid or experience-lacking thing I say!

you are not technical ?

 

[Fox_089]

you are not technical ?

View attachment 180485

Nope, just a guy trying to learn.

 

[nguyenvanminh3010]

cho mình xin bios LA-D581P REV:1.0

 

[Megaserwis]

Hi i have no display with this file can you repair it

 

[ThienBui]

Hi i have no display with this file can you repair it

 

[John Llagas]

good day..do you have EC bin file for this model??
KB9022Q thanks in advance

 

[ThienBui]

good day..do you have EC bin file for this model??
KB9022Q thanks in advance

ECs.zip

 

[T-HEX]

does anubody have DGPU VBIOS ROM for UG13?

 

[ThienBui]

does anubody have DGPU VBIOS ROM for UG13?

send file old I help check

 

[T-HEX]

did not have before

 

[sualaptop24h]

anh clearme giup em file voi a. len cham lam anh

 

[ThienBui]

anh clearme giup em file voi a. len cham lam anh

 

[SD tech]

pls rebuild for me no image

 

[ThienBui]

pls rebuild for me no image

builds2444.zip

 

[SD tech]

pls rebuild the v rom for me

 

[ThienBui]

pls rebuild the v rom for me

not for main bios no have repair

 

[bnc50]

IS PASS STORAGE IN 9022 OR no?

 

[bnc50]

i no connect to 9022? use settings LA-D581P KB_pins=30 LEFT DOWN 05MM KSO3=5 KSI4=26 KSI7=23 KSI6=24 KSI5=25 CHIP=KB9022 its ok?

 

[bnc50]

i attach old rom

 

[bnc50]

Finally, I Flashed EC And Remove Password It, I Used to connect programmer with Board connector JEC, settings is: LA-D581P_EC KB_pins=6 RIGHT DOWN 05MM KSO3=1 KSI4=4 KSI7=3 KSI6=2 KSI5=5 KB9022Q