clear me please HP EliteBook 820 G3 Notebook 6050A2725001-MB-A01
Download list
HP EliteBook 820 G3 Notebook 6050A2725001-MB-A01.bin.zip
8.3 MB · Views: 168
8.3 MB · Views: 168
can kurtaran
Registered member
hp elitebook 820 G3 password I need unlock it please help me thanx. I add my bios file.
can kurtaran
Registered member
pls help me for hp elitebook 820 g3 password. I add my password bios file its up. Pls unlock it.
can kurtaran
Registered member
@ ThienBui thanx. it is working.
ec 8mb Please send file old i check..
password in file 16MB
How to remove here
https://vinafix.com/resources/how-t...efi-hp-elitebook-elitebook-folio-series.1210/
You only need remove password in file 16MB or Programming bios new you need Clear me before Programming....
JENTORIS
Registered member
The problem is the 16MB bios is error while trying to remove the password, it doesn't boot anymore. please help me to fix it.
Hi all,
I just registered to the forum. I spent quite a long time searching the web and studying some documents trying to understand how to reset the BIOS password for a HP elitebook 820 G3 I bought second hand. I discovered only later that the BIOS was locked by a password and realized it is impossible to reset the bios password unless you call HP to get a unique smc.bin file or replace the BIOS chip. I am moving on this last solution and I ordered the BIOS chip that is a winbond 25Q128FV. Before doing that I am kindly asking you any advice about this procedure. The vendor told me the chip is loaded with latest firmware and nothing more than replace the chip is required. I want to be sure this is correct and I will note face any other problem. It appears to me that the chip could be missing the basic info about the laptop...am I correct. What should I do in this case?
Is there any other software procedure?
@vince59
It seams you bought a Bios chip with clean ME. I would give it a try.
My question now:
I have 820 G3 and I dumped the BIOS (look at file)
I cleaned the password and flashed it back but the machine flashes 3x times and goes off.
I flashed the original back but the same problem (flashes 3x time and then off)
Should I program the 8mb file, too? Or Am I missing something?
It seams you bought a Bios chip with clean ME. I would give it a try.
My question now:
I have 820 G3 and I dumped the BIOS (look at file)
I cleaned the password and flashed it back but the machine flashes 3x times and goes off.
I flashed the original back but the same problem (flashes 3x time and then off)
Should I program the 8mb file, too? Or Am I missing something?
