Asus G752VSK Schematics and BIOS

Star Rating

5.00 star(s)

Asus G752VSK
Schematics and BIOS
ASUS ROG G752VSK REV2.1.pdf
G752VSK MB.fz

 

[koleg555]

I need schematic and bios Asus G752VSK
Thank you.

 

[ThienBui]

yes update on top

 

[lagadatorumea]

Do u have this i boardview file ? thanks

 

[ThienBui]

Do u have this i boardview file ? thanks

current Unavailable boardview

 

[lagadatorumea]

Ok, thank you for replying so fast.. Will do the work without it works fine too.. cheers boss..

 

[bindiou]

Hi,
on MB ASUS G752VSK,
getting error : WHEA uncorrectable error after 2-5 minutes after boot, any OS
any ideas ?
ty

 

[bindiou]

hi
is it possible to unlock hidden menus in BIOS ?
i want to disable overclocking
i am getting WHEA uncorrectable error
ty

 

[ThienBui]

hi
is it possible to unlock hidden menus in BIOS ?
i want to disable overclocking
i am getting WHEA uncorrectable error
ty

I do not know about this issue.
i think you need Programming one bios other

 

[pclaptop]

Need bios for Asus G752VSK Rev 2.0 , have 2 bios IC , 25Q80 and 25Q64 ( clean me ) , thanks a lot

 

[ThienBui]

Need bios for Asus G752VSK Rev 2.0 , have 2 bios IC , 25Q80 and 25Q64 ( clean me ) , thanks a lot

Only Programming 8MB

Asus G752VSK Schematics and BIOS

Asus G752VSK Schematics and BIOS ASUS ROG G752VSK REV2.1.pdf

vinafix.com

 

[pclaptop]

Thanks , but with that dump , image in 20-30 seconds

 

[ThienBui]

Thanks , but with that dump , image in 20-30 seconds

So what do you need 1MB to do ???

 

[jasko_jacker_1]

I read that 25Q80DVSIG on G752VY is not for the EC, therefore it must be programmed via the keyboard connector, is the connector of the G752VY the same of G752VSK ? You have the configuration for vertyanov or pins name for G752VY ? Thanks

 

[ThienBui]

I read that 25Q80DVSIG on G752VY is not for the EC, therefore it must be programmed via the keyboard connector, is the connector of the G752VY the same of G752VSK ? You have the configuration for vertyanov or pins name for G752VY ? Thanks

25Q80DVSIG non Programming, It manages non-EC devices

 

[jasko_jacker_1]

25Q80DVSIG non Programming, It manages non-EC devices

Ok , I found the solution, to program the EC you should not use the keyboard connector (the keyboard connector is used to program the keyboard's ite) but another connector. However, since the EC firmware is stored in the main bios, it should be self-programmed at startup.

 

[Eli Leonidas Alvarado]

using translator
I am new to bios programming.
I have a laptop g752vsk rev 2.0 which has all the correct voltages, but the screen is black, I changed with another copy of a functional bios replacing the information (serial, key, I did not find the mac address) of the original damaged bios, to the functional bios and I clean ME with the injector, but it does not recognize the data, different series and different mac q does not correspond. I think this is because I am selecting incomplete blocks from the original bios.
Please, could you tell me from where, or what are the ranges of blocks where the information is located, to be able to make a copy of the: serial, key, UUID, Mac address of the original equipment.

 

[ThienBui]

using translator
I am new to bios programming.
I have a laptop g752vsk rev 2.0 which has all the correct voltages, but the screen is black, I changed with another copy of a functional bios replacing the information (serial, key, I did not find the mac address) of the original damaged bios, to the functional bios and I clean ME with the injector, but it does not recognize the data, different series and different mac q does not correspond. I think this is because I am selecting incomplete blocks from the original bios.
Please, could you tell me from where, or what are the ranges of blocks where the information is located, to be able to make a copy of the: serial, key, UUID, Mac address of the original equipment.

once repair other BIOS programmer must accept this problem

 

[Eli Leonidas Alvarado]

And where is a EC dump ?

 

[Piseth]

Please you help clear me