What's new

BIOS Dell G5 15 5500 19753-1

Star Rating
5.00 star(s)
Wistron Selek 15 N18E CML-H 19753.jpgDell G5 15 5500 19753-1 BIOS, Schematics
Wistron Selek 15 N18E CML-H 19753
Dell G3 15 3500 Wistron Selek MLK N18E 19753-1 BoardView.gr
boardview
SELEK MLK N18E 19753-1 FJT96$CA photo
 

Download list

[email protected]
2.4 MB · Views: 813

[email protected]
6.5 MB · Views: 864

Wistron Selek 15 N18E CML-H 19753.pdf
4.3 MB · Views: 1,079


What mate from me?
As i mentioned above laptop was dead because of shorted mosfet on battery input voltage after replacing mosfet device turned one but it shows 4 Amber one white , and it was not going in bios stuck on dell logo and same goes to F12 ONE time boot menu too ,
so i thought it has problem with bios too I Read one 8 MB BIOS chip with RT809h tool but it was not reading main 16mb bios it gives with verification error ,
So by mistake FLASHED BIOS WITH a dump from this thread, RT809h Erased the bios but on writing the error was the same so I took off bios chip from motherboard and this time it read successfully but unfortunately it does not have the data because it was erased when i tried to write when bios was on motherboard ,
So I have the data from 8MB chip i dont have orignal data from 16 MB
I TRIED FEW BIOS FOR 16MB CHIP BUT WITH THOSE FAN SPIN AND KEYBOARD LID OPEN FOR SECOND THEN GOES IN LOOP AS SHOWN IN VIDEO .
HERE IS MY SERVICE TAG : 7TD6303
 

Download list

IMG_0277.jpg
IMG_0276.mp4
2.3 MB · Views: 0

As i mentioned above laptop was dead because of shorted mosfet on battery input voltage after replacing mosfet device turned one but it shows 4 Amber one white , and it was not going in bios stuck on dell logo and same goes to F12 ONE time boot menu too ,
so i thought it has problem with bios too I Read one 8 MB BIOS chip with RT809h tool but it was not reading main 16mb bios it gives with verification error ,
So by mistake FLASHED BIOS WITH a dump from this thread, RT809h Erased the bios but on writing the error was the same so I took off bios chip from motherboard and this time it read successfully but unfortunately it does not have the data because it was erased when i tried to write when bios was on motherboard ,
So I have the data from 8MB chip i dont have orignal data from 16 MB
I TRIED FEW BIOS FOR 16MB CHIP BUT WITH THOSE FAN SPIN AND KEYBOARD LID OPEN FOR SECOND THEN GOES IN LOOP AS SHOWN IN VIDEO .
HERE IS MY SERVICE TAG : 7TD6303
you need check AMD chipset
 
you need check AMD chipset
AS i told above initial problem was not with bios actual problem was shorted mosfet and because of that Battery charging ic I2C Data pin was shorted so it gives 4 amber and one white that issue I resolved it I am here if you can kindly tag here a working bios with my motherboard refrence thanks
 
AS i told above initial problem was not with bios actual problem was shorted mosfet and because of that Battery charging ic I2C Data pin was shorted so it gives 4 amber and one white that issue I resolved it I am here if you can kindly tag here a working bios with my motherboard refrence thanks
So there's no reason to fix the BIOS yet. AMD BIOS doesn't have a fix like Intel BIOS, understand??
 
So there's no reason to fix the BIOS yet. AMD BIOS doesn't have a fix like Intel BIOS, understand
With this attached bios finally its shows Dell logo then it goes manufacturing mode unable to skip with ALT+F , After once it shows manufacturing mode then it turn off to turn on again i have to take off CMOS Battery and again same message , can you please fix this bios with my service tag so I can boot it normally thanks i will appreciate that .
 

Download list


With this attached bios finally its shows Dell logo then it goes manufacturing mode unable to skip with ALT+F , After once it shows manufacturing mode then it turn off to turn on again i have to take off CMOS Battery and again same message , can you please fix this bios with my service tag so I can boot it normally thanks i will appreciate that .
need buy patch 35$
Payment link to buy Patch
 
Con este bios adjunto finalmente muestra el logotipo de Dell, luego pasa al modo de fabricación y no se puede omitir con ALT + F. Una vez que muestra el modo de fabricación, se apaga para encenderlo nuevamente, tengo que quitar la batería CMOS y nuevamente aparece el mismo mensaje. ¿Puede arreglar este bios con mi etiqueta de servicio para poder iniciarlo normalmente? Gracias, lo apreciaría.
Funcionando al 100
 
Back
Top