- Star Rating
RAMPAGE V EXTREME BIOS
BIOS 1601 16MB
boardview
RAMPAGE_V_EXTREME 1.01B.fz
RAMPAGE_V_EXTREME 1.01C.fz
BIOS 1601 16MB
boardview
RAMPAGE_V_EXTREME 1.01B.fz
RAMPAGE_V_EXTREME 1.01C.fz
Please provided full model
Asus
Asus Rampage V Extreme rev 1.01. This model thosen't have a USB 3.1 port. I you need anything else please let me know. Thanks
same bios above top
Sorry for not explaining me better. I know that the bios above is the one to flash for this motherboard. But in my case this BIOS gives me Q-POST 76, which according to the manual is an error in the execution of a micro program in the PCH. Everything indicates that the Chipset is partially damaged. For this reason I installed Asrock x99 WS.BIN and got video and was able to enter SETUP. But I would like a BIOS that integrates better on this motherboard without the Q-POST 76 problem.
I hope I have explained myself better and that you can help me. Thank you.
I hope I have explained myself better and that you can help me. Thank you.
how? Please make one video i check
Sometimes show's over the board de 76 code instead the 00.
In some cases the test card is not working properly. If it is not possible to identify the problem, you need to check them all to determine the problem.
Hi. Here the issue it's seams de PCH DXE zone inside the Chipset. The code 76 according the manual is an error during the execution of a microcode. I removed the RAM, the video card, everything except the CPU. The error persist, and the boardview don't help much because lacks of information about the signals and booting seecuence. So, I'm trying to work around the problem testing other BIOS. And I had a positive result with ASRock Extreme 11. But don't work properly. That's the reason what I'm looking for another's BIOS and more info. Thanks
ASUS RAMPAGE V EXTREME REV 1.01 ,IT HAS 2 16 MB BIOS SO SO CONFUSED WHICH BIN FOR WHICH ONE CAN YOU PLEASE HELP ,RAMPAGE V EXTREME BIOS
BIOS 1601 16MB
boardview
RAMPAGE_V_EXTREME 1.01B.fz
RAMPAGE_V_EXTREME 1.01C.fz
sepulturaz
Registered member
Hi, I need to test dump´s Eeprom O2U5 and O3U2
Power on but no Post no Q-Code, stay (00)
Tested Bios1 e Bios2, but OK.
eeprom 24C02:LAB_EC_O3U2_CHIPBios.bin
and eeprom:24C08:lab_EC_O2U5_035_A2.bin
Sometimes it turns on and works fine.
Any idea???
Thankyou
Power on but no Post no Q-Code, stay (00)
Tested Bios1 e Bios2, but OK.
eeprom 24C02:LAB_EC_O3U2_CHIPBios.bin
and eeprom:24C08:lab_EC_O2U5_035_A2.bin
Sometimes it turns on and works fine.
Any idea???
Thankyou
sepulturaz
Registered member
need try one BIOS new before
I have a U3.1 motherboard.
What BIOS is good for it?
u3.1 is what ?
