BIOS M1603Q M1403QA

Star Rating

5.00 star(s)

M1603Q M1403QA
M1403qa photo
M1403QA KB_pins=30 LEFT DOWN 08MM PD0=2 PD1=11 PD2=16 PD3=8 PD4=17 PD5=15 PD6=19 PD7=1 BUSY=5 STB=13 AFD=3 INIT=10 SLIN=12 KSI4=9 KSI5=7 CHIP=IT5125VG-128

 

[ThienBui]

Good day please fix this bios file , no display
AMD ryzen 7 4000 series .
ASUS M15021
BOARD NUMBER M1403QA R2.0

PLEASE KEEP ALL DMI

AMD need Programming bios new above

 

[ScorpioMan86]

AMD need Programming bios new above

alright please provide new bios

i have already tried a few files but still no display

 

[ThienBui]

alright please provide new bios

i have already tried a few files but still no display

M1603Q M1403QA.BIN.zip

 

[gala]

Plz disable onboard ram

 

[ThienBui]

Plz disable onboard ram

 

[maoe]

please repair my bios voltage amper up n down but no display , thanks

 

[ThienBui]

please repair my bios voltage amper up n down but no display , thanks

AMD no have builds

 

[maoe]

AMD no have builds

please send file bios good , i try .

 

[ThienBui]

please send file bios good , i try .

M1603Q M1403QA.BIN.zip

 

[Andrey.l]

Отключите оперативную память на моем биосе, не шлите мне пожалуйста биос другого автора, делайте отключение на моем биосе.
Спасибо!

 

[ThienBui]

Отключите оперативную память на моем биосе, не шлите мне пожалуйста биос другого автора, делайте отключение на моем биосе.
Спасибо!

AMD
M1603Q M1403QA.BIN.zip

 

[leal_laptop]

Eliminar Ram integrada

 

[ThienBui]

Eliminar Ram integrada

 

[ELTC]

ASUS VIVOBOOK M1403Q
Sir, please disable the onboard RAM, the problem is bluescreen error code 0x50

 

[ThienBui]

ASUS VIVOBOOK M1403Q
Sir, please disable the onboard RAM, the problem is bluescreen error code 0x50

send file bios i check can disable

 

[ELTC]

send file bios i check can disa

 

[ThienBui]

M1603Q M1403QA.BIN.zip

 

[ELTC]

M1603Q M1403QA.BIN.zip

This is the BIOS that has been edited to disable the onboard RAM. The laptop initially bluescreened because the onboard RAM was problematic. I reprogrammed the BIOS with the RAM disable file, but it didn't appear. I've installed additional RAM but it still doesn't appear. If I reprogram it with the original BIOS, the additional RAM is detected in the BIOS. Is there another way, sir?

thank you