Lenovo ThinkPad X1 Carbon (5th Generation/2017) BIOS DX120 NM-B141

Lenovo ThinkPad X1 Carbon (5th Generation/2017)
BIOS DX120 NM-B141
X1 Carbon 5th Gen - Kabylake (Type 20HR, 20HQ) Laptop (ThinkPad)
add
W25Q128 DX120 NM-B141 V1.0
Schematics Lenovo X1 NM-B141 YD1KL-3 Ver 3.08

 

[ThienBui]

nv

ko nhận nvme anh ạ

nvme mà cls là thua rồi

 

[Khanhdt]

no display bios .plz rebuild .tks admin

 

[ThienBui]

no display bios .plz rebuild .tks admin

builds.zip

 

[AimedFix98]

NEED BOARDVIEW OF THE MOTHERBOARD PLEASE NM-B141 plz

 

[ThienBui]

NEED BOARDVIEW OF THE MOTHERBOARD PLEASE NM-B141 plz

Unavailable

 

[CHOIINKYU]

Please clean this bios.

 

[ThienBui]

Please clean this bios.

 

[giorgio]

no video, can you help ?

 

[ThienBui]

no video, can you help ?

clssss.zip

 

[giorgio]

clssss.zip

Still no image, no LCD, no HDMI

 

[ThienBui]

Still no image, no LCD, no HDMI

try more bios above and check hardware

 

[CHOIINKYU]

With this BIOS, the screen does not appear.
Please clean this bios

 

[ThienBui]

With this BIOS, the screen does not appear.
Please clean this bios

clsss.zip

 

[mybiosisbroken]

Lenovo ThinkPad X1 Carbon (5th Generation/2017)
BIOS DX120 NM-B141
X1 Carbon 5th Gen - Kabylake (Type 20HR, 20HQ) Laptop (ThinkPad)
add
W25Q128 DX120 NM-B141 V1.0
Schematics Lenovo X1 NM-B141 YD1KL-3 Ver 3.08

Hi,

I have an X1 Carbon Gen 5 DX120 NM-B141 Rev 1. I was updating the BIOS with a bootable USB, but the PC failed to restart. I flashed "Thinkpad X1 carbon 5 DX120 NM-B141 REV 1.0 ok.bin" and "W25Q128 DX120 NM-B141 V1.0" to chip U49 with the CH351 programmer, but no luck. The fan spins for a few seconds and the power LED blinks 3 times.

Do I also need to program chip U184? Is that what NM-B141 MEC.bin is for?

Thanks