HP Z8 G4 Workstation

HP Z8 G4 Workstation
HP Z8 G4 Workstation P60_0292

 

[ThienBui]

I have a faulty workstation HP Z8 G4 (motherboard FMB-1703). The problem is that it won't start. The main problem is a BIOS malfunction. I took a BIOS dump from the faulty station. I also took a BIOS dump from another working workstation HP Z8 G4.
Can you help me make a normal BIOS dump for a faulty workstation?

bad station:
s/n: CZC9379L62

normal (working) other station
s/n: CZC932800T
SKU Number: Z3Z16AV
MAC1: c8:d9:d2:24:72:90
MAC2: c8:d9:d2:24:72:93

Do you mean revise info s/n ?

 

[alijanuz]

Do you mean revise info s/n ?

I need help with a BIOS restore. The BIOS (bad station) I downloaded is corrupted and won't start. Please if you can fix it.
Additionally I downloaded the BIOS from another normal station, maybe it can help too.

 

[ThienBui]

try this

 

[alijanuz]

try this

When the power supply is connected to the station, it immediately produces 5 long and 2 short signals (5 red and 2 white signals are duplicated on the LED).
This condition indicates that the embedded controller does not have valid firmware.
Can you fix this?

 

[ThienBui]

I think hardware have problem

 

[alijanuz]

The MEAnalyzer program shows an error in the BIOS you sent. For example, there is no such error in the BIOS from a working normal station.
Can you check the BIOS again?

 

[ThienBui]

The MEAnalyzer program shows an error in the BIOS you sent. For example, there is no such error in the BIOS from a working normal station.
Can you check the BIOS again?

Do you mean MEAnalyzer it can check BIOS errors?

 

[alijanuz]

I am confused that ME Analyzer gives this message when opening the native and sent dump: "Error: Detected CSE Extension 0x03 with wrong Partition Hash at FTPR > FTPR.man!".
If you open a dump from a second normal station there is no such message.

 

[ThienBui]

I am confused that ME Analyzer gives this message when opening the native and sent dump: "Error: Detected CSE Extension 0x03 with wrong Partition Hash at FTPR > FTPR.man!".
If you open a dump from a second normal station there is no such message.

to me this software doesn't make sense, if you think it's a bug then fix it yourself