BIOS GF65 THIN 9SD MS-16W11

Star Rating

5.00 star(s)

MS-16W11.102.bin
MS-16W1.108.bin
BIOS MS-16W11
9th Gen
Schematics MS-16W1 Rev 1.0.pdf

 

[ThienBui]

hi , i changed a pch on a msi board 16w11 and it start with fan at full speed no picture here the bios attached if someone can help me
thanks

i think you need to check the changed PCH, it should have a delay screen before checking to BIOS

 

[wizzitech]

i think you need to check the changed PCH, it should have a delay screen before checking to BIOS

I took a pch from an other board so maybe it has conflict with the me region ?the other board had a 7th gen cpu here it’s a 9th cpu , it may cause this trouble ?

Also I ordered a ec, the board was fuck up by an other technician , dead pch , missing traces on the ec , and I don’t know if the ec has correct firmware .

The laptop start , stop , start and full fan , no picture

 

[ThienBui]

I took a pch from an other board so maybe it has conflict with the me region ?the other board had a 7th gen cpu here it’s a 9th cpu , it may cause this trouble ?

Also I ordered a ec, the board was fuck up by an other technician , dead pch , missing traces on the ec , and I don’t know if the ec has correct firmware .

The laptop start , stop , start and full fan , no picture

No, PCH gen 7th can not support 9th

 

[wizzitech]

No, PCH gen 7th can not support 9th

They have the same reference on it was wrote sr40b

 

[wizzitech]

They have the same reference on it was wrote sr40b

Maybe a 8th cpu the other laptop has

 

[ThienBui]

Maybe a 8th cpu the other laptop has

I don't understand what you are doing, but if you want to replace the hardware you need an accessory equivalent to the part to be replaced

 

[wizzitech]

I don't understand what you are doing, but if you want to replace the hardware you need an accessory equivalent to the part to be replaced

The msi board had a shorted pch model sr40b , I have a other board , acer with a good pch sr40b , so same model of pch , the board start and stop and then fan at full speed my question is maybe my bios need a clear me to display ?because I took the pch from another board ?

 

[ThienBui]

The msi board had a shorted pch model sr40b , I have a other board , acer with a good pch sr40b , so same model of pch , the board start and stop and then fan at full speed my question is maybe my bios need a clear me to display ?because I took the pch from another board ?

here clearme

 

[wizzitech]

here clearme

I will try it today and let you know if it works , thank you for your reply

 

[pchavezsermatech]

repair bios no video

 

[ThienBui]

repair bios no video

bbb

 

[Piseth]

Hello admin help clear me

 

[ThienBui]

Hello admin help clear me

 

[HAMZAPCSOLUTION]

clear me sir
ms-16w11

 

[ThienBui]

clear me sir
ms-16w11

 

[rajeshshiva]

CLEAR ME PLZ

 

[ThienBui]

CLEAR ME PLZ

 

[rajeshshiva]

STILL 15CSEC LATE

 

[ThienBui]

STILL 15CSEC LATE

Where does it start to display late?

 

[rajeshshiva]

I CAN'T UNDERSTAND WHAT YOUR SAYING.MY OLD BIOS
MISSING