Asus X541NA rev. 2.1

Star Rating

5.00 star(s)

Asus X541NA rev. 2.1
60NB0E80-MB1900

X541NA,,X540SA,,X540SC..
(KSO3=8 KSI4=9 KSI7=4 KSI6=6 KSI5=7)

X541NA r2.1.323 test ok
boardview Asus X541NA Rev2.1 Boardview(FZ).fz

 

[Bios-Esquemas-Colegas]

??

Dear, as you can imagine, I already checked both the previous one and several uploads in the thread. If it is not too much trouble and taking into account that I have a membership, I would beg you to regenerate based on the backup that you provide, a new bios, in order to avoid problems with the ME region, the serial number, etc. Thanks a lot

 

[ThienBui]

Dear, as you can imagine, I already checked both the previous one and several uploads in the thread. If it is not too much trouble and taking into account that I have a membership, I would beg you to regenerate based on the backup that you provide, a new bios, in order to avoid problems with the ME region, the serial number, etc. Thanks a lot

laptop does not have display you related to info what to do?

 

[macbookbinhduongvtc]

con này có boardview ko ad ơi

 

[ThienBui]

con này có boardview ko ad ơi

chưa có boardview

 

[clarajovel]

hi can you rebuilt thanksss

 

[ThienBui]

hi can you rebuilt thanksss

 

[Orion Electronic S.]

porfavor borrar ME

 

[ThienBui]

porfavor borrar ME

 

[tankhanglaptop]

CLEAR PASSWORD, PLEASE!

 

[ThienBui]

CLEAR PASSWORD, PLEASE!

 

[Pritish ghosh]

plz send bios asus board part no 60NB0E80-MB1230 PENTIUM

 

[nguyen_ngoc]

BOARDVIEW X541NA REV 2.1

 

[reki79]

CLEAR PASSWORD , PLEASE!

 

[ThienBui]

CLEAR PASSWORD , PLEASE!

 

[Rui Fortunato]

Hello Thien, the boardview on the top it's not the correct, can you provide the correct one?

 

[ThienBui]

Hello Thien, the boardview on the top it's not the correct, can you provide the correct one?

current only have 1 file, Where is it not right?

 

[Rui Fortunato]

current only have 1 file, Where is it not right?

for example, i'm trying to track a problem in the pwm near the cpu and the pwm in my board have 28 pins and in the boardview only have 20, and the component location's are wrong

 

[alin_bcu]

Hello, please can you remove password?

 

[ThienBui]

Hello, please can you remove password?

 

[alin_bcu]

thank you, fast reply, i really apreciate !!!