What's new
By:

BIOS Elitebook 845 G8 LANCIA13/Grizzly2.0-6050A3234201-MB-A0 (A1)


#11
Today, 10:20 AM

Hello, the laptop starts to turn on and soon turns off and caps locks lights up, it seems that they tried to remove the code and the resistor on the third leg flew. I can't figure out how many ohms of resistance to put on it, please help me. The current flows through the other side, not so much. I put 0.33 ohms, it didn't turn on at all, 3.3 ohms, it worked but still turned off, Maybe someone has a schematic or a meter and can measure how much this resistance should be. Thanks.
motherboard : 835 g8 6050a3234201-mb-a01 please help me ,

The battery is not charging either, as far as I know, after the BIOS was removed incorrectly. Maybe you can help me. I think part of it has flown away. I only have the old BIOS, the original U366, the other one is clearly lost. The laptop will boot up and then the light on the charger will not light up at all. Enters Windows and turns capslock on and off Help me Please
 

Download list

sosooo said:
#11
Today, 10:20 AM

Hello, the laptop starts to turn on and soon turns off and caps locks lights up, it seems that they tried to remove the code and the resistor on the third leg flew. I can't figure out how many ohms of resistance to put on it, please help me. The current flows through the other side, not so much. I put 0.33 ohms, it didn't turn on at all, 3.3 ohms, it worked but still turned off, Maybe someone has a schematic or a meter and can measure how much this resistance should be. Thanks.
motherboard : 835 g8 6050a3234201-mb-a01 please help me ,

The battery is not charging either, as far as I know, after the BIOS was removed incorrectly. Maybe you can help me. I think part of it has flown away. I only have the old BIOS, the original U366, the other one is clearly lost. The laptop will boot up and then the light on the charger will not light up at all. Enters Windows and turns capslock on and off Help me Please
Click to expand...
First, program another bios to see if the bios is at fault
 
sosooo said:
#11
Today, 10:20 AM

Hello, the laptop starts to turn on and soon turns off and caps locks lights up, it seems that they tried to remove the code and the resistor on the third leg flew. I can't figure out how many ohms of resistance to put on it, please help me. The current flows through the other side, not so much. I put 0.33 ohms, it didn't turn on at all, 3.3 ohms, it worked but still turned off, Maybe someone has a schematic or a meter and can measure how much this resistance should be. Thanks.
motherboard : 835 g8 6050a3234201-mb-a01 please help me ,

The battery is not charging either, as far as I know, after the BIOS was removed incorrectly. Maybe you can help me. I think part of it has flown away. I only have the old BIOS, the original U366, the other one is clearly lost. The laptop will boot up and then the light on the charger will not light up at all. Enters Windows and turns capslock on and off Help me Please
Click to expand...
Most motherboards have 33 ohm resistor on bios data lines. Try 33ohm not 3.3ohm asus uses 15ohms resistor so you can try 15ohms also
 
You must log in or register to reply here.

Similar threads

ThienBui
  • Article Article
BIOS HP EliteBook 855 G7 845 G7 6050A3200201-MB-A01( A1)
2
Replies
31
Views
10K
ThienBui
ThienBui
ThienBui
  • Article Article
BIOS HP EliteBook 855 G8 6050A3239901-MB-A01(A1)
2
Replies
26
Views
8K
ThienBui
ThienBui
ThienBui
  • Article Article
BIOS HP EliteBook x360 830 G8 opel-6050a3219701-mb-a01(a1)
4 5 6
Replies
114
Views
31K
ThienBui
ThienBui
ThienBui
  • Article Article
BIOS HP 240 G8 HEDWIG01 6050A3158901 MB A01(A1)
4 5 6
Replies
119
Views
27K
ThienBui
ThienBui
ThienBui
  • Article Article
BIOS HP Zbook 14 G8 CORVETTE-6050A3213301-MB-A01(A1)
2 3
Replies
53
Views
13K
ThienBui
ThienBui

Latest posts

Back
Top