What's new

Toshiba Tecra Z50-A / Z55-A FALXSY2 8MB

Hi
No problem
But I can't access to show serial number with cabs ctrl Tab ctrl enter
Laptop show message , not verified
How i can do it
Thank you
You need to try each button press after 5 sec not do fast exp: press crtl-wait 5 sec after press Tab same as doing other then show Sn or challange code
 
Thank you
i will try it and tell you
 
Response Code = D9TTV-RXEEB-1KEW9-PQURY-URE7F
You will receive the "Response code"

Enter the Response code (do not mix up "0" and "O" or "C" and "G" or "8" and "B")
and press [ENTER] key.
The "TOSHIBA Setup Utility" (BIOS) appears.

Go to the "Securtiy" tab by pressing the cursor right key [->].

Check if the line "User Password Registered" is marked.

Press [ENTER] then [space bar] and [ENTER] key three times to set the password to "Not Registered".

Press [F10] key to save the changes and confirm this by pressing the [Y] key.

The BIOS Password is deleted.

Press F2 go bios setting and enter agian this code then unlock remember

Note: Please take photo or video when enter code
 
Response Code = D9TTV-RXEEB-1KEW9-PQURY-URE7F
You will receive the "Response code"

Enter the Response code (do not mix up "0" and "O" or "C" and "G" or "8" and "B")
and press [ENTER] key.
The "TOSHIBA Setup Utility" (BIOS) appears.

Go to the "Securtiy" tab by pressing the cursor right key [->].

Check if the line "User Password Registered" is marked.

Press [ENTER] then [space bar] and [ENTER] key three times to set the password to "Not Registered".

Press [F10] key to save the changes and confirm this by pressing the [Y] key.

The BIOS Password is deleted.

Press F2 go bios setting and enter agian this code then unlock remember

Note: Please take photo or video when enter code
When clicked on user password register lap top told me please enter enough characters like picture attached
 

Download list

16194417025002419030906943365997.jpg

Latest posts

Back
Top