BIOS Intel NUC8i7BEB NUC8i5BEB NUC8i3BEB
hi im tested thes fail but not work device power on and off
please send Another file
the original file
old bios error what ?
no signal after update bios
send old I check
The same problem in your bios power on and off (new)
old bios power on but no signal (old)
Good hardware is not a problem. This new device is not used but an update is downloaded from the customer
i fix
- Get an USB flash drive, partition it as FAT32
- Get the BIO, BIOS file from here:https://downloadcenter.intel.com/download/28394/BIOS-Update-BECFL357-86A-?product=126140(I recommend version 51, only one .bio file needs to be present on the drive)
- Open NUC, then completely remove the BIOS reset jumper.
- Insert USB drive, power up, press F7 multiple times (a wired keyboard is recommended, also the USB port doesn't matter), the led from USB drive should light up, and then you'll be prompted with the change.
- It will take 5...10 minutes to restore the BIOS.
PRADEEP JAKHAR
Registered member
plz clear me no display
JOEL TORIO
Registered member
kindly repair NUC8i3BEH1
