What's new

Lenovo Thinkpad X240

I tried to readout the original SMSC MEC1633 with a RT809F
And the Programmer show a Fault Message .
-> The Chips programming algorithem is not defined

Can anyone Help me what i have to do ?

Aditional Question : The Board : do i have to Power on the Board or Board without any Power connections ?
 

Download list

Fehlermeldung RT809F.jpg
1 : only connected or switched on ?


2: The Programmer show a Fault Message .
-> The Chips programming algorithem is not defined
 

Download list

Fehlermeldung RT809F.jpg Fehlermeldung RT809F_2.jpg
Install Software to C:/RT809F
Software Version is 20190701
Reboot system
RT809F Programmer with Firmware version: V2.0
Adapter you see on previous Pictures
Chip inserted - Dot on Chip Agree with white Dot on Adapter
Selected SMSC and MEC1633@BGA
if i click "read" -> i get the Message
"This chip's programming algorithm is not defined."

Removed Adapter ( Empty Programmer ) and click "READ" -> result same Message "This chip's programming algorithm is not defined."

Reinstalled Software no help
 
Install Software to C:/RT809F
Software Version is 20190701
Reboot system
RT809F Programmer with Firmware version: V2.0
Adapter you see on previous Pictures
Chip inserted - Dot on Chip Agree with white Dot on Adapter
Selected SMSC and MEC1633@BGA
if i click "read" -> i get the Message
"This chip's programming algorithm is not defined."

Removed Adapter ( Empty Programmer ) and click "READ" -> result same Message "This chip's programming algorithm is not defined."

Reinstalled Software no help
The problem of connecting MEC to Adapter is the important issue.
 

Latest posts

Back
Top