What's new

Toshiba Satellite Pro R50 R55 FAEBSY2 BIOS

We only have some similar examples you can refer to
 
Follow the instructions and send me the display code image

models:

All from 2012 to 2017

Note: The Challenge and Response Code makes it possible to bypass the BIOS password. Clearing must be done in the System Setup (BIOS).

Switch on the notebook, when the boot logo appears press [F2].
"Password=" will be display.
Press keys in the order [CTRL], [TAB], [CTRL] and [ENTER].
The Serial number and Challenge code will be displayed.
Take a picture of it, and send to me

Please do not mix up "0" and "O" or "C" and "G" or "8" and "B".

IMPORTANT :
Do not switch off the laptop or restart, cause response code ll change, NO REFUND if so


You will receive the "Response code"

Enter the Response code (do not mix up "0" and "O" or "C" and "G" or "8" and "B")
and press [ENTER] key.
The "TOSHIBA Setup Utility" (BIOS) appears.

Go to the "Securtiy" tab by pressing the cursor right key [->].

Check if the line "User Password Registered" is marked.

Press [ENTER] then [space bar] and [ENTER] key three times to set the password to "Not Registered".

Press [F10] key to save the changes and confirm this by pressing the [Y] key.

The BIOS Password is deleted.

Press F2 go bios setting and enter agian this code then unlock remember

Note: Please take photo or video when enter code
payment done check
 
Follow the instructions and send me the display code image

models:

All from 2012 to 2017

Note: The Challenge and Response Code makes it possible to bypass the BIOS password. Clearing must be done in the System Setup (BIOS).

Switch on the notebook, when the boot logo appears press [F2].
"Password=" will be display.
Press keys in the order [CTRL], [TAB], [CTRL] and [ENTER].
The Serial number and Challenge code will be displayed.
Take a picture of it, and send to me

Please do not mix up "0" and "O" or "C" and "G" or "8" and "B".

IMPORTANT :
Do not switch off the laptop or restart, cause response code ll change, NO REFUND if so


You will receive the "Response code"

Enter the Response code (do not mix up "0" and "O" or "C" and "G" or "8" and "B")
and press [ENTER] key.
The "TOSHIBA Setup Utility" (BIOS) appears.

Go to the "Securtiy" tab by pressing the cursor right key [->].

Check if the line "User Password Registered" is marked.

Press [ENTER] then [space bar] and [ENTER] key three times to set the password to "Not Registered".

Press [F10] key to save the changes and confirm this by pressing the [Y] key.

The BIOS Password is deleted.

Press F2 go bios setting and enter agian this code then unlock remember

Note: Please take photo or video when enter code
i want to remove supervisor password.
 

Download list

WhatsApp Image 2020-10-27 at 7.04.41 PM.jpeg
Back
Top