BIOS Think Centre P340 IQ4x0il2 NM-C901

Star Rating

5.00 star(s)

Think Centre P340 IQ4x0il2 NM-C901
BIOS

 

[RainStorM_tj]

Hello! Native bios is corrupted, I flashed your dump, initialization only after 30 seconds. Can you please clean ME?

 

[ThienBui]

You sure BIOS 32MB this slow? MX25L25633F.BIN.zip
you have save old bios send I check

 

[RainStorM_tj]

Yes there is. It's ruined.

 

[ThienBui]

Yes there is. It's ruined.

 

[RainStorM_tj]

Does not start with this dump builds.zip

 

[ThienBui]

Does not start with this dump builds.zip

only help builds

 

[AFFIRMA]

Can u fix it pls?

 

[ThienBui]

Can u fix it pls?

builds.zip

 

[phanhuanati]

clear giúp tôi, khởi động chậm

 

[vu hai duy]

lên hình chậm, nhờ ad clearme

 

[ThienBui]

lên hình chậm, nhờ ad clearme

con này cls in file 8mb

 

[HoulScream]

Can you fix??

 

[ThienBui]

Can you fix??

 

[DannyXmas]

Hello ThienBui,

I have a Lenovo ThinkStation P340 Tiny, motherboard IQ4X0IL2 / NM-C901.

The motherboard had no POST.
Power LED was on, fan was running, but there was no display and no beep.

I backed up both SPI chips.

Then I programmed:

• USPI1 (32 MB): MX25L25633F.BIN
• USPI2 (16 MB): NM-C901 USPI02 16M.BIN

After programming these files, the motherboard boots normally and Windows starts successfully.

This makes me think the problem is related to the original 32 MB BIOS dump, because with the donor BIOS the board works.

The only remaining issue is that Windows shuts down normally, but the motherboard does not power off completely. The screen turns off, but the power LED and fan remain on until I hold the power button.

Could you please check my original 32 MB dump and repair it while keeping the original DMI information (Serial Number, Machine Type, UUID, etc.)?


Thank you.

 

[ThienBui]

Hello ThienBui,

I have a Lenovo ThinkStation P340 Tiny, motherboard IQ4X0IL2 / NM-C901.

The motherboard had no POST.
Power LED was on, fan was running, but there was no display and no beep.

I backed up both SPI chips.

Then I programmed:

• USPI1 (32 MB): MX25L25633F.BIN
• USPI2 (16 MB): NM-C901 USPI02 16M.BIN

After programming these files, the motherboard boots normally and Windows starts successfully.

This makes me think the problem is related to the original 32 MB BIOS dump, because with the donor BIOS the board works.

The only remaining issue is that Windows shuts down normally, but the motherboard does not power off completely. The screen turns off, but the power LED and fan remain on until I hold the power button.

Could you please check my original 32 MB dump and repair it while keeping the original DMI information (Serial Number, Machine Type, UUID, etc.)?


Thank you.