- Star Rating
- 5.00 star(s)
Raider GE68 HX 14VIG-285US MS-15M1 MS-15M11
Download list
MS-15M1.70D.bin.zip
7.6 MB · Views: 25
7.6 MB · Views: 25
msi ms-15m11 clear me this file
Can you check this bios? This BIOS shows a reaction to the power button, but there is no complete initialization. When I tried cleaning the ME region or flashing the BIOS you posted above, there was a short spike on pin 5 of the BIOS chip, then the level dropped low. There are no other reactions. It does not respond to the power button. Thank you.
Thanks, but this one - is not working in my case. It does not respond to power button, but with old dump - it's power on, cpu getting hot - but no picture on display
you can try more bios on topThanks, but this one - is not working in my case. It does not respond to power button, but with old dump - it's power on, cpu getting hot - but no picture on display
so try more bios on top and check hardwareI already wrote that they don't work. I tried them. Bootguard 5 is activated in the BIOS, and I suspect that the problem is precisely with it, and that we need to work with the original dump.
Also, there is no confirmation that these dumps worked for anyone else.
But, thank you for your support.
MS-15M11 NO DISPLAY REBUILD THIS ORIGINAL BIOS
\WHY YOU DIDNT REPAIR OUR ORIGINAL BIOS ?\
Because there are many errors that cannot be recovered.\WHY YOU DIDNT REPAIR OUR ORIGINAL BIOS ?\
Hola necesito el bios
Raider GE68HX 13VF
msi MS-15M21 y programar el KBC it5571vg-128
Soy nuevo en esto pero como le puedo hacer para programar el it5571vg-128 el original esta en corto no tengo los datos
You need to have a tool to support EC programming and know how to program itSoy nuevo en esto pero como le puedo hacer para programar el it5571vg-128 el original esta en corto no tengo los datos
Si tengo la herramienta lo que necesito es el archivo Ec para programarloEs necesario tener una herramienta que apoye la programación de EC y saber cómo programarla
You need to first read and backup the old file before thinking about programming itSi tengo la herramienta lo que necesito es el archivo Ec para programarlo