Ask Hp Z2 mini G5 bios password

Question & Answer Forums
Start with 2.4 beeps and led error code meaning
The embedded controller is checking or recovering the boot block.
After 10 min the error code changed in 5.2 beeps and led codes
The embedded controller cannot find valid firmware.
 
Last edited:
Start with 2.4 beeps and led error code meaning
The embedded controller is checking or recovering the boot block.
After 10 min the error code changed in 5.2 beeps and led codes
The embedded controller cannot find valid firmware.
above is two BIOS or same 1 PC ?
 

Similar threads

Back
Top