BIOS Foxconn H61M-S BIOS

Foxconn H61M-S
BIOS C52F1P03

• Mainstream segement MB, support LGA1155 for Intel®Ivybirdge/Sandybridge processors

• Support dual channel 4 DIMMs DDR3 memory up to 16GB at 1600(IVB)/1333/1066

• SATAII / SATAIII controller integrated

• Support VGA, DVI and HDMI interface

• Support 2* USB 3.0 ports

• Gigabit LAN and 6-channel HD audio

 

[danysan]

Foxconn H61M-S
BIOS C52F1P03

• Mainstream segement MB, support LGA1155 for Intel®Ivybirdge/Sandybridge processors
• Support dual channel 4 DIMMs DDR3 memory up to 16GB at 1600(IVB)/1333/1066
• SATAII / SATAIII controller integrated
• Support VGA, DVI and HDMI interface
• Support 2* USB 3.0 ports
• Gigabit LAN and 6-channel HD audio

This bios does not work for me I have another bios that is from a similar board and with this one if it gives video the problem is that when the board is turned off and I turn it on again it no longer gives video I will upload the bios that does work for you to review

 

[ThienBui]

This bios does not work for me I have another bios that is from a similar board and with this one if it gives video the problem is that when the board is turned off and I turn it on again it no longer gives video I will upload the bios that does work for you to review

 

[danysan]

please can you give me checking the old bios the other day imaghen mbut it booted me error "rom image update denied"

 

[ThienBui]

please can you give me checking the old bios the other day imaghen mbut it booted me error "rom image update denied"

make video problem I check

 

[danysan]

hacer un problema de video que verifico

La bios que me diste ya da imagen pero me sale ese error en recovery no rebota va directo a esa ventana al poner f9 y por defecto se activan las opciones de recovery al momento de poner "continue with flash update" los bloques se reescriben Se reinicia pero luego ya no da video, es hora de reprogramar pero sigue dando el mismo problema, así que te pasé la vieja bios para ver si eso se podía arreglar gracias

 

[ThienBui]

I not see any problem,
Can you tell me what your purpose is?

 

[danysan]

No veo ningún problema,
¿Puedes decirme cuál es tu propósito?

El problema es que no entra al sistema cuando enciendo la placa base, solo va directamente a la ventana del bios, incluso modificando el orden de disparo, solo entra en la ventana del bios en recuperación, nada más, pero no arranca el sistema como debe ser.

 

[ThienBui]

i think there is another problem you need to check all

 

[jason17]

Foxconn H61M-S
BIOS C52F1P03

• Mainstream segement MB, support LGA1155 for Intel®Ivybirdge/Sandybridge processors
• Support dual channel 4 DIMMs DDR3 memory up to 16GB at 1600(IVB)/1333/1066
• SATAII / SATAIII controller integrated
• Support VGA, DVI and HDMI interface
• Support 2* USB 3.0 ports
• Gigabit LAN and 6-channel HD audio

I updated this bios to foxconn h61m-s but still 2 DIMM slots not working A1,B1 working A2,B2 not working

 

[ThienBui]

I updated this bios to foxconn h61m-s but still 2 DIMM slots not working A1,B1 working A2,B2 not working

can not check form bios