Excuse me, Admin/Suhu, I would like to ask a question and request your assistance regarding the Lenovo ThinkPad L13 with motherboard code 19837-1. After I re-flashed the BIOS, I received the message 'Error 2100: Detection Error on Storage'. Before the flash, the condition was normal and the storage was read properly. Where do you think the problem lies? Please guide and enlighten me. Thank you in advance.
Ask LENOVO THINKPAD L13 GEN2- LAR-2 MB 19837-1
- Thread starter Pemmz81
- Start date
Question & Answer Forums
POST OG BACKUP AND SNID
This is the original backup file, Original.BIN, as shown in the photo.
it builds from the bios you provided
Thank you, Admin.
I flashed the rebuilt file, but unfortunately the laptop has no display.
I compared the rebuilt file with my original backup. My original backup uses the Non-VPro firmware branch:
UEFI BIOS: R1FET64W (1.38)
ECP: R1FHT44W (1.22)
However, the rebuilt file uses the VPro firmware branch:
UEFI BIOS: R1PET44W (1.36)
ECP: R1PHT26W (1.18)
The original backup boots and displays normally, but still shows Error 2100 and cannot detect the M.2 SSD.
The rebuilt file does not display at all. The files are also identical from offset 0x000000 to 0x102FFFF, so it appears that the Intel ME region was not rebuilt.
Could you please rebuild my original backup using the correct Non-VPro R1F firmware branch, preserve the original DMI/serial/UUID data, and check the Intel ME/EFS, NVRAM, and M.2 NVMe initialization data?
Thank you for your assistance.
you can try more bios here
Thank you, Admin.
I tried the new BIOS file. The laptop now powers on and displays normally, but Error 2100 still appears and the M.2 NVMe SSD is still not detected.
So the no-display problem has been resolved, but the original storage detection problem remains. Could you please check the BIOS again, especially the Intel ME/EFS, NVRAM, PCIe/NVMe configuration, and M.2 initialization data?
2100 detection error on storage device M.2
My original backup also boots normally but has the same Error 2100 issue.
Thank you.
I tried the new BIOS file. The laptop now powers on and displays normally, but Error 2100 still appears and the M.2 NVMe SSD is still not detected.
So the no-display problem has been resolved, but the original storage detection problem remains. Could you please check the BIOS again, especially the Intel ME/EFS, NVRAM, PCIe/NVMe configuration, and M.2 initialization data?
2100 detection error on storage device M.2
My original backup also boots normally but has the same Error 2100 issue.
Thank you.
That's the problem of SSD not building and the above cls doesn't fix it
This shows that an SSD error has occurred
Similar threads
-
LENOVO THINKPAD L13-GEN2- LAR-2 MB 19837-1- Started by ThienBui
- Replies: 405
-
-
Ask Lenovo ThinkPad L13 Gen 2 LAR-2 MB 19837-1- Started by khawarsa
- Replies: 21
-
-
☕ NEW • PAY IN VND
1 Ly Cà Phê
49k / Ngày
Bỏ một ly cà phê hôm nay.
Ngày mai sửa thêm một chiếc laptop ☕
Latest posts
-
BIOS Dell Latitude 5410/5510 and Dell Precision 3550 FDW50 LA-J381P- Latest: hienthocomputer
-
-