What's new

BIOS ASUS X7400PC

ThienBui said:
16mb.zip
Click to expand...
It still doesn't show an image. It's strange because with the power supply, you can clearly see that the computer is doing something, because the consumption goes up and down. But in the end, the consumption stays constant and there's no image. What's certain is that with the BIOS I posted in my post last week, it boots and shows an image, but without an SSD :(
 
daninec said:
It still doesn't show an image. It's strange because with the power supply, you can clearly see that the computer is doing something, because the consumption goes up and down. But in the end, the consumption stays constant and there's no image. What's certain is that with the BIOS I posted in my post last week, it boots and shows an image, but without an SSD :(
Click to expand...
I think you need check hardwrae
 
ThienBui said:
Of course it is Asus but the wire is another computer or the same computer you bought before?
Click to expand...
Let me explain. This has always been about the same device. The original issue was that it wouldn’t power on or show any image. After reading through the forum, I found a BIOS file and flashed it — and it did power on, but without detecting the SSD.


That’s when I uploaded the original BIOS here in this post; you cleaned it, but the laptop still wouldn’t start. Then I uploaded a .bin file that does turn on the device, and you charged me $35 for the patch — but once applied, it also doesn’t boot.


You told me to check the hardware, and that’s when I sent the photo showing the device powered on with the working .bin, so a hardware fault seems to be ruled out. What I need now is for you to apply the $35 patch to the .bin that actually powers on, please
 
daninec said:
Let me explain. This has always been about the same device. The original issue was that it wouldn’t power on or show any image. After reading through the forum, I found a BIOS file and flashed it — and it did power on, but without detecting the SSD.


That’s when I uploaded the original BIOS here in this post; you cleaned it, but the laptop still wouldn’t start. Then I uploaded a .bin file that does turn on the device, and you charged me $35 for the patch — but once applied, it also doesn’t boot.


You told me to check the hardware, and that’s when I sent the photo showing the device powered on with the working .bin, so a hardware fault seems to be ruled out. What I need now is for you to apply the $35 patch to the .bin that actually powers on, please
Click to expand...
I have sent you a chat file, please let me assist it in it
 
You must log in or register to reply here.

Latest posts

Back
Top