- Star Rating
- 5.00 star(s)
next check hardwareSymptoms still open does not show up and cut off
you want clear me ?x280 nm-b521 rev 2.0
pls clear this bios..
The device does not take the command to turn on and when the BIOS battery is removed the laptop boots but without a picture for half a minute and then stops.
Yes pleaseyou want clear me ?
Yes please
Please buy 1 VIPPlease help me.
I ran "diagnostics" because there were many times when the boot logo did not transition to the boot screen.
After that, the PC would power down at the memory test point, and the boot button and fan would repeatedly glow and move for a moment.
Could this be a BIOS failure?
1 VIP OK!Please buy 1 VIP
Account upgrades
Programming bios this and make one video result I checkPlease help me.
I ran "diagnostics" because there were many times when the boot logo did not transition to the boot screen.
After that, the PC would power down at the memory test point, and the boot button and fan would repeatedly glow and move for a moment.
Could this be a BIOS failure?
Conducted.Programming bios this and make one video result I check
clear me.zip
that shows BIOS no problem next you need to check the hardwareConducted.
As a result, the symptoms did not change.
Conducted.
As a result, the symptoms did not change.
Understood, sir.that shows BIOS no problem next you need to check the hardware
I think hardware problemUnderstood, sir.
Thank you very much.
When I checked, I was able to output the logo.
However, when I shut down completely and start up, I use "F1" to enter the BIOS, select "Restart" without making any changes, and then try to enter the BIOS again, it freezes with the logo.
When I try to enter the BIOS again, it freezes with the logo. If I forcefully press and hold the power button to shut down, I can enter the BIOS.
Can you tell me what's going wrong?
need buy patch + key 15$remove pass
x280remove pass