BIOS ThinkPad T14s, X13 GT4A5/GX3A5 NM-C791 Rev 1.0

Star Rating

5.00 star(s)

ThinkPad T14s, X13 GT4A5/GX3A5 NM-C791 Rev 1.0
BIOS Schematics
Lenovo Thinkpad X13-T14s Gen 1 AMD - LCFC GT4A5-GX3A5 NM-C791 REV1.0 Schematic And BoardView PDF
NM-C791.pdf
NM-C791 BoardView.pdf
GT4A5 GX3A5 NM-C791 r1.0.tvw




Backup

 

[shyamu]

think pad x13 gen1 nm-c791 rev 2.0 bios repair please sir

 

[ThienBui]

think pad x13 gen1 nm-c791 rev 2.0 bios repair please sir

AMD Please check chipset

 

[effektiveddd]

Somone have pinout for programming ITE ??

 

[ThienBui]

Somone have pinout for programming ITE ??

ite name ?

 

[effektiveddd]

IT8300FN

 

[ThienBui]

IT8300FN

I think not Programming
current I not see info Programming it

 

[effektiveddd]

So where is password if this chip is not programming ? Meybe only no pinout for this moment and chip can be programming.

 

[ThienBui]

Programming 16MB password not remove ?

 

[effektiveddd]

NO programming BIOS not solve problem. Password is in KBC.

 

[effektiveddd]

Any solution for remove from ITE pass. Cut some lines ?? or i need find clean or extract from .exe ?

 

[ThienBui]

Any solution for remove from ITE pass. Cut some lines ?? or i need find clean or extract from .exe ?

BIOS - ThinkPad T14s, X13 GT4A5/GX3A5 NM-C791 Rev 1.0

ThinkPad T14s, X13 GT4A5/GX3A5 NM-C791 Rev 1.0 BIOS Backup

vinafix.com

 

[effektiveddd]

BIOS - ThinkPad T14s, X13 GT4A5/GX3A5 NM-C791 Rev 1.0

ThinkPad T14s, X13 GT4A5/GX3A5 NM-C791 Rev 1.0 BIOS Backup

vinafix.com

OK i was find solution where put FF in ITE file no need change ITE from other laptop.

 

[klemzo200]

sir removed bios password

 

[ThienBui]

sir removed bios password

 

[klemzo200]

sir i uss ur bios and this one

 

[ThienBui]

sir i uss ur bios and this one

can not unlock from bios
you need Programming EC ITE

 

[klemzo200]

sir i uss ur bios and this one

hello sir
plzz urjent

 

[hacker010191]

I've programmed the KBC but it's still with password, do you know what more I need to do to unlock?

 

[ThienBui]

I've programmed the KBC but it's still with password, do you know what more I need to do to unlock?

where did you get the ec file from? And are you sure it doesn't have a password? eg it is backed up from another machine running ok….