What's new

MacBook Pro 15-inch Touch Bar A1707 820-00281-10 BIOS schematics 820-00281

Star Rating
5.00 star(s)
MacBook Pro 15-inch A1707 ( Touch Bar & Touch ID )
Motherboard: 820-00281-10
820-00281-A
BIOS 25Q64FVIQ 8MB
Schematics, Boardview
SCHEM,MLB_BAFFIN,X363G
820-00281
051-00647
J80_MLB
A1707 820-00281-A tbt rom usb firmware U2890 UB090
820-02841.cad

820-00781-10.jpg
Screen Shot 2016-11-18 at 10.17.24 PM.jpg
 

Download list

J80_MLB.pdf
2.3 MB · Views: 3,533

J80G_MLB.brd
1 MB · Views: 3,325

820-00281-A.bin.zip
5 MB · Views: 1,388


820-02841.cad.zip
254 KB · Views: 53

Last edited:
on top Available same 820-00281-x
i use bios on top, but why it cannot detect the last mac osx? i try to reinstall, but after it running halfway, it return to boot usb installer. can you help me, admin? my case before is "a critical software update is required for your mac. but an error was encountered while installing this update." do you have any solution for this case, admin?
 
i use bios on top, but why it cannot detect the last mac osx? i try to reinstall, but after it running halfway, it return to boot usb installer. can you help me, admin? my case before is "a critical software update is required for your mac. but an error was encountered while installing this update." do you have any solution for this case, admin?
mac os version you use and how you setup ?
 
mac os version you use and how you setup ?
i already try 10.13( high sierra) and already try (command +r) to recovery via ethernet.
all is same. it said an error encountered while instaling update.

and finally i try use bios above. after use bios above, i try to reinstall osx by using usb installer high sierra, its normall like usual in the first step(format ssd, n click install mac) and start process like usual until it restart. after restart (here is the PROBLEM), it cannot read directly to ssd, but it is read usb installer again. even i plug out the usb installer, it still cannot read ssd, just like ssd not detect.

can you help fix this issue?
 
i already try 10.13( high sierra) and already try (command +r) to recovery via ethernet.
all is same. it said an error encountered while instaling update.

and finally i try use bios above. after use bios above, i try to reinstall osx by using usb installer high sierra, its normall like usual in the first step(format ssd, n click install mac) and start process like usual until it restart. after restart (here is the PROBLEM), it cannot read directly to ssd, but it is read usb installer again. even i plug out the usb installer, it still cannot read ssd, just like ssd not detect.

can you help fix this issue?
no, I don't know what it needs to check.
 

Latest posts

Back
Top