Search results

  1. IMG_4222.jpg

    IMG_4222.jpg

  2. IMG_4223.jpg

    IMG_4223.jpg

  3. IMG_4221.jpg

    IMG_4221.jpg

  4. servisntb

    Tháo bung MacBook Air 13" Early 2014

    Please unpass this
  5. IMG_4219.jpg

    IMG_4219.jpg

  6. IMG_4218.jpg

    IMG_4218.jpg

  7. IMG_4199.jpg

    IMG_4199.jpg

  8. servisntb

    HP Laptop 17-by4xxx SNAPE02-6050A3216501-MB-A02(A2)

    Bios is ok, but after turning on it shows this message, how to remove it for this model? Is it possible to transfer DMI from the original bios to builds892 ?
  9. IMG_4198.jpg

    IMG_4198.jpg

  10. servisntb

    HP Laptop 17-by4xxx SNAPE02-6050A3216501-MB-A02(A2)

    Please help with this bios No display
  11. servisntb

    V330-15IKB, V330-15ISK BIOS LV315KB 17807-3M

    Please clear ME, display late. V330-15IKB
  12. servisntb

    PORTEGE Z10T-A203 PT132V FWCTSY2 A3469A G3469A

    Bios builds09 tested, with that it doesn't boot at all. It boots with the original bios, but only sometimes. I tried another HDD and boot via usb, the problem persists.
  13. servisntb

    Lenovo Ideapad 100S-11IBY NB116BT1_MB_V10 NB116BT1_MB_V11

    Please remove password 100s-11iby
  14. servisntb

    PORTEGE Z10T-A203 PT132V FWCTSY2 A3469A G3469A

    Yes, code is FWCTSY2
  15. servisntb

    PORTEGE Z10T-A203 PT132V FWCTSY2 A3469A G3469A

    Yes I already tried that, mostly no picture or it reported a FW error, i tried all bios available here
  16. servisntb

    T480 (Type 20L5, 20L6) BIOS (ThinkPad) ET480 NM-B501

    Please Clear ME, display late, NM-B501
  17. servisntb

    PORTEGE Z10T-A203 PT132V FWCTSY2 A3469A G3469A

    I need to fix this bios, it often happens that it does not boot, even from usb and also from HDD Mainboard G3469 Toshiba Protege Z10T-A
  18. servisntb

    BIOS X409FB REV 2.0 FL8700FJ

    Asus X509F, mainboard x409fb rev 2.0. Disable onboard ram: Thanks to the boardwiev and schematic available here, I found out how to shut down the onboard ram. This configuration works, tested, I admit it's not professionally done, when soldering with hot air all 3 too small resistors flew away...