Lenovo G50 ITE cannot conect with Vertianov Eeeprom

Hi i have this laptop charge but not power up . Button have 3,3v and 3,3v feedback of butoon.

i think i need to program ITE chip. but my soft vertianov dont have configuration of nm-A362 , so i dont have schematic to configure that pin .
any help please

 

[ThienBui]

ITxxxx ?

 

[cifam]

i used svod programeur its perfect for me .... its possible to write new it without desoldring the ITE kbc ...

 

[ThienBui]

I only use RT809f & PEB-1

 

[synapsea]

ITxxxx ?

IT8586E THANKS

 

[ThienBui]

Reference here

 

[bioshunger]

Use a-361 data vertianov .. I have all of this programmer vertinova,rt809f ,svod and peb1



Sent from my LS-5014 using Tapatalk

 

[synapsea]

Thanks for your response but i have a problem manual to connect with ITE is russian language , i cannot connect with ite Is this connection ok or not ?
this pin KSO3, KSI4.5.6.7. NEED TO LEAVE UNCONNECTED OR WHAT I NEED TO DO PLEASE ?

 

[bioshunger]

at destination folder open file "MB connection ITE.txt" and add this line

NM-A362 KB_pins=30 (JKB3) PD0=7 PD1=11 PD2=13 PD3=18 PD4=14 PD5=10 PD6=17 PD7=15 BUSY=4 STB=12 AFD=1 INIT=8 SLIN=9 KSI4=5 KSI5=6

open program and "select motherboard"

 

[bioshunger]

Or replace your file with attach file

 

[bioshunger]

Visit my youtube channel for tutorial (Hindi Language)

RT809F Programmer

Vertianov Programmer

svod Programmer

 

[synapsea]

at destination folder open file "MB connection ITE.txt" and add this line

NM-A362 KB_pins=30 (JKB3) PD0=7 PD1=11 PD2=13 PD3=18 PD4=14 PD5=10 PD6=17 PD7=15 BUSY=4 STB=12 AFD=1 INIT=8 SLIN=9 KSI4=5 KSI5=6

open program and "select motherboard"

Thanks connected working now 100%. thanks

 

[bioshunger]

NM-A381 KB_pins=26 (JKB1) PD0=20 PD1=16 PD2=14 PD3=9 PD4=13 PD5=17 PD6=10 PD7=12 BUSY=23 STB=15 AFD=26 INIT=19 SLIN=18 KSI4=22 KSI5=21

 

[sandeeptrc]

pls helf

 

[yogesh.tcspune]

I ALSO USE RT809f & PEB-1 BUT I am never able to connect it on lenovo board by using FPC cable ite 8586. i have always to solder the ite on peb board.

 

[shaurya]

Hi i have this laptop charge but not power up . Button have 3,3v and 3,3v feedback of butoon.

i think i need to program ITE chip. but my soft vertianov dont have configuration of nm-A362 , so i dont have schematic to configure that pin .
any help please

file configuration for your mb
NM-A362 KB_pins=30 (JKB3) PD0=7 PD1=11 PD2=13 PD3=18 PD4=14 PD5=10 PD6=17 PD7=15 BUSY=4 STB=12 AFD=1 INIT=8 SLIN=9 KSI4=5 KSI5=6

 

[abdallahamer]

file configuration for your mb
NM-A362 KB_pins=30 (JKB3) PD0=7 PD1=11 PD2=13 PD3=18 PD4=14 PD5=10 PD6=17 PD7=15 BUSY=4 STB=12 AFD=1 INIT=8 SLIN=9 KSI4=5 KSI5=6

hello i need file of nm-a362kb pins is 26 not 30pins!

 

[APPLE CARE]

Hello i Want to program IT8586 I/O chip kindly share procedure i have programer RT-809F AND KINDLY SHARE PIN OUTS THANKS

 

[ThienBui]

Hello i Want to program IT8586 I/O chip kindly share procedure i have programer RT-809F AND KINDLY SHARE PIN OUTS THANKS