There is a second one the sameThinkpad 13s Gen 2 ITL with a defect does not turn on. After flashing "clearmess" the same defect does not see SSD and video only via HDMI. Dump from the second same 13s G2 ITL. Perhaps there is a clean BIOS from Lenovo on Think Book 13s G2 ITL?
Can you tell me why you absolutely must use BIOS clear me ?
There are two ThinkBook 13s Gen 2 ITL laptops. On the first laptop long switch-on about 20 seconds, so I asked to clear ME. After flashing bios "Clear ME" SSD stopped working and the picture is displayed only via HDMI. I tried this BIOS on a second laptop of the same type, on it the SSD does not see the same thing and a black screen, the picture is only via HDMI.
after 20s all work normal or not ? make one video go to window I check
Motherboard code ?
The first R910CRJH for which I asked Clear me. The second R910HSRK which I also tried to flash.
Yes, after 20 seconds it works fine.
Does not respond to the power button
weird i just clear me
I tried to flash it twice with this file. The result is no reaction to the power button. On the native BIOS, everything works as it did - the inclusion of 20 seconds.
need to clarify why it's 20s late
Yes, maybe the BIOS is no longer original, since the BIOS flash drive was already soldered before me.
This is how it behaves after the "Clear ME" firmware
There are changes. A picture appeared on the screen but a long start for about 1 minute and does not see the SSDtry bios this
