What's new

lenovo t480 dead efter program bios chip

i use svod3 and write the bios file from this site
when it finish the labtop dead.
after that i write the old file but the same problem
 
i use svod3 and write the bios file from this site
when it finish the labtop dead.
after that i write the old file but the same problem

Maybe it's not bios problem ... do you have some measurements taken?
 
first desolder the bios chip from the disc. then put it in the programmer and then unlock the chip and program it.
on the board you can not because the voltage on the circuit is too low. the part plate steals and there will always be an error.
 

Latest posts

Back
Top